CHF 1,290.00*
Content:
1 Stk.
Available, delivery time: 7-14 days
Product number:
LRTFMO-09/20
EAN/GTIN:
7611507999914
Product information "Slatted base Trioflex Motor "
The Trioflex Motor slatted base is equipped with 2 motors for head and foot adjustment, cable remote control, mains isolation and emergency lowering. The insert frame offers outstanding sleeping comfort and fulfils the highest quality requirements. The insert frame is made of solid beech wood with a plywood structure and is fitted with 42 flexible and extremely permanently elastic TPE caps. The slatted base has a shoulder comfort zone with mechanical lowering, ideal for side sleepers, as well as a self-regulating centre zone with firmness regulation clips for the pelvic comfort zone.
- The slatted base is suitable for any mattress and has an installation height of approx. 9 cm.
- Radio remote controls, foot and side rails are optionally available.
- Required ground clearance: approx. 14 cm - installation height of approx. 9 cm
Please note that these are gross dimensions. The effective internal dimensions are 1 cm less in width and approx. 3 cm less in length, so that it fits into standard bed frames.
- The slatted base is suitable for any mattress and has an installation height of approx. 9 cm.
- Radio remote controls, foot and side rails are optionally available.
- Required ground clearance: approx. 14 cm - installation height of approx. 9 cm
Please note that these are gross dimensions. The effective internal dimensions are 1 cm less in width and approx. 3 cm less in length, so that it fits into standard bed frames.
| Cap position: | bar-covering |
|---|---|
| Colour group: | brown |
| Format (dimensions): | 90 x 200 cm |
| Height: | 9 cm |
| Label: | FSC |
| Length: | 200 cm |
| Lying firmness adjustment: | Shoulder comfort zone with mechanical lowering, Self-regulating centre zone, Firmness adjustment clips for pelvic comfort zone |
| Material group: | Wood, Metal, Plastic |
| Maximum load: | 130 kg |
| Number of comfort zones: | 5 |
| Number of slats: | 42 |
| Origin: | Austria |
| Origin of the wood: | Europe |
| Product type: | Slatted base |
| Shipping: | Forwarding agency |
| Slatted frame adjustability: | Head, Feet, motorised |
| Width: | 90 cm |
| Wood: | Beech |
| internal measurement: | 89 x 197 cm |
| suitable mattress size: | 90 x 200 cm |
Login
Please note when installing in a bed
- The ground clearance (C) must be at least 13.5 cm
- Crossbars or corner fittings of the bed may be a maximum of 18 cm in the head area.
- Crossbars or corner fittings of the bed may be a maximum of 38 cm in the foot area .
Ideal
Slatted base TrioFlex radio remote control
CHF 290.00*
With the TrioFlex radio remote control, you can operate your Trioflex slatted base with motor wirelessly by radio.FunctionsBack and leg motor up / down simultaneouslyBack motor up / downLeg motor up / downButton for torch functionUnder "Data sheets" on this page you will find the instructions for commissioning the radio remote control for the Trioflex slatted base motor. The instructions can be downloaded.
Slatted base TrioFlex motor synchronisation cable
CHF 100.00*
The synchronisation cable is used to connect two individual Trioflex Motor slatted bases so that they work synchronously. This is particularly practical in double beds where both sides need to be adjusted equally.Under "Data sheets" on this page you will find the instructions for commissioning the synchronisation cable for the Trioflex Motor slatted frame. The instructions can be downloaded.
Slatted frame foot bar
CHF 15.00*
The foot bar prevents the mattress from slipping off the slatted frame at the foot end. It is attached to the cross slats of the foot section. Can also be used as a headrest.The appropriate size must be selected for slatted frames up to 100 cm and slatted frames from 120 cm with different slat thicknesses. If the brackets are too narrow or too wide, they can be carefully adjusted to the slat thickness using pliers.Made from 6 mm chrome-plated metal wire with transparent end caps to protect against scratches.The foot stirrups are sold individually.Suitable for the slatted frame models:- Softsleep Trioflex- Swissbed Yverdon
Slatted base side rail
CHF 15.00*
The side rail prevents the mattress from slipping sideways off the slatted base . It is clamped onto the cross slats.The appropriate size must be selected for slatted frames up to 100 cm and slatted frames from 120 cm with different slat thicknesses. If the holders are too narrow or too wide, they can be carefully adjusted to the slat thickness using pliers.Made of 6 mm chrome-plated metal wire with transparent end caps to protect against scratches.Depending on requirements, up to four side brackets can be used per bed.The side brackets are sold individually.Suitable for the slatted frame models:- Softsleep Trioflex- Swissbed Yverdon